Our Preventive Maintenance Plan ensures your HVAC systems are in tip-top shape, up and running all year long.  

Inspections include:

Category No. Cooling and Heating Checklist Cooling Heating
Overall Performance 1 Check system performance X X
2 Monitor temperature differential X X
3 Inspect and test the heating gas usage X
Thermostat 4 Inspect thermostat operation, batteries, & calibration X X
Refrigerant 5 Check refrigerant charge X X
6 Top off refrigerant, as needed X X
Filter(s) 7 Replace and/or clean standard filters (1 per system) X X
Motor(s) 8 Check & lubricate motors X X
9 Test & inspect all capacitors X X
10 Monitor blower motor starting amps X X
11 Inspect blower motor wheel X X
12 Inspect and clean draft motor housing X
Compressor 13 Inspect compressor windings X
14 Test compressor starting operation X
Controls 15 Inspect, test, and clean contactor X X
16 Inspect and test defrost control system X
17 Test defrost sensor and outdoor sensors X
18 Inspect safety switches X X
19 Inspect and test ignition system X
20 Check pressure switches X
21 Inspect and test all emergency heating elements and relays X
22 Check all voltages and amp draws X X
Mechanical 23 Clean condenser coil X
24 Clean secondary drain pan and primary pan, if accessible X X
25 Inspect and monitor heat exchangers X
26 Inspect and clean condensate drains X X
27 Inspect and monitor evaporator coil X X
28 Check fan belts X X
29 Adjust combustion air to burners X
30 Pull and clean burners X
31 Clean and adjust pilot assembly X
32 Check for gas leaks in furnace X
33 Clean heat exchanger, if accessible X
Electrical 34 Check all wiring and connections X X
35 Check heat strips X
36 Check polarity X X
37 Replace worn wiring connections X X